The Common Causes of Low Water Pressure In Your Home, Explained

On average, Americans use 82 gallons of water each day at home. With that amount of use, it’s important that you have a good water supply with acceptable pressure. So if you are experiencing low water pressure in your home, it can be a cause of concern.

Luckily, there are simple ways to determine what is causing the low pressure. Let’s take a look at some of the most common causes of low water pressure and how you can fix them in the greater Polk County area.

High Water Demand

If you are using water from multiple plumbing fixtures at the same time, it can sometimes be too high of a demand for the water pressure to be correct at all of the fixtures. This is a relatively easy issue to fix.

You’ll just need to coordinate the use of water at different fixtures in your home. For example, you may not be able to run your dishwasher, washer, and shower at the same time.

Faulty Fixtures

Showerheads, faucets, and other fixtures can become clogged or faulty. If you experience sudden low water pressure at one faucet but not at others, the problem may be that fixture.

If this happens, cleaning the screen or aerator may fix the problem. However, sometimes the fixture may need to be replaced.

Broken Water Pressure Regulator

A water pressure regulator keeps the water pressure in your home within a certain acceptable range. However, over time, the regulators can degrade. If this happens, you may experience water pressure that is either too high or too low.

A plumber can help determine if your pressure regulator is broken. If it is, they can also install a new one to correct the low water pressure in your home.

Clogged and Corroded Plumbing

Blockages caused by clogged pipes or scale buildup from hard water can disrupt the water flow. If this happens, you may experience low pressure. In order to fix this, you’ll either need to clean out the pipes or replace them, depending on the severity of the issue.

Over time, your pipe system can become corroded. If this happens, you may need to replace larger sections of your plumbing system in order to fix the issue.

Water Valve Problems

Your home has two main water shut-off valves – one at the meter and one on or in your home. You can make sure both of these valves are fully open.

A partially or fully turned off valve can cause low water pressure. However, it can be a simple fix.

How to Find the Cause

To find where the issue is coming from, you’ll need to first figure out the scope of the problem. You may want to make sure the entire municipality is not having pressure issues.

You’ll also need to determine if only one fixture is having the issue or if there is low pressure throughout the house.

You should test each plumbing fixture in both the interior and exterior of your home. Check if the problem is present for both the hot and cold temperature settings. This can help you rule out an issue with your water heater.

How to Fix Low Water Pressure

Low water pressure in your home can be caused by many different issues. If you narrow down the cause, you’ll be better able to find the solution. A professional plumber can help investigate the problem and determine the best way to fix your water pressure issues.

Call The Plumber to get your repairs in Polk County fixed today.